EK523
In order to facilitate the compaction of the bedding material, holes are cut in the baseplate of the order of 50 mm diameter or more, near to the centre of […]
EK166
Shear and bearing joints using close tolerance bolts in fitted holes behave in a similar manner to connections with clearance holes, except that the bolt slips are greatly reduced. Slip […]
EK165
When shear and bearing bolts in clearance holes are used in an in-plane force joint, there is an initial slip when the shear is first applied to the joint as […]
EK144
In many practical tension members with more than one row of holes, the reduction in the cross-sectional area may be reduced by staggering the rows of holes. In this case, […]