EK467
Expansion joints provide a complete separation between two parts of a slab.
EK325
Isolation joints permit the slab to move up or down slightly relative to walls, columns, footings or other adjacent construction.
EK300
If the slab is supported on four sides and the ratio of the long side to the short side is equal to or greater than 2, most of the load […]
EK184
Bond and anchorage failure usually occurs when the slab is subjected to heavy concentrated loads near the support or when heavy loads are applied over a rather short span. The […]
EK89
It is assumed that each of the panels formed by the supports and yield lines is a flat plate. The bending deformation within the panels is ignored because the overall […]
EK88
Have a rectangular slab simply supported along each edge, carrying a uniformly distributed load throughout. The slab is assumed to be of constant depth and reinforced in each direction parallel […]